Other guide accessories and components

汤姆森的2 hb (AccuSlide)线性表2 hb(所以他们lide) is a high performance slide table based on Thomson's continuously supported, ProfileRail system using square rail technology. The units are designed to absorb extremely high load ...

MS (MicroStage) Linear Units Thomson's MicroStage MS ultra compact linear slide tables are among the most compact, low cost, and lightweight ball guided systems on the market today. The guide's design is based off Thomson's Super Ball ...

Rail length: 50 mm - 1,000 mm
Rail width: 40 mm
Load: 15 kgf - 25 kgf

FSK40 linear guide is semi-sealer structure, body width 40mm, high stability,compact structure,versatility feature, suitable for normal working environment, it is convenient to use single axis or multi-axis to assemble easy functional ...

Rail length: 50 mm - 1200 mm
Rail width: 80 mm
Load: 20 kgf - 40 kgf

Dust Water Proof Enclosed Ball Screw Linear Module Short Description: Technical Feature FSL80 linear guide, fully sealed structure, body width 80mm, it is designed for dustproof usage in hard environment, avoid dust or miscellaneous ...

Rail length: 100 mm - 2,000 mm
Rail width: 120 mm
Load: 50 kgf - 100 kgf

【Technical Feature】 FSL120 linear module, fully enclosed structure, body width 120mm, two guides and four sliders, with high precision, multi-segment repeat positioning, compact structure, strong versatility, suitable for use in special ...

Use: unit adjustment and positioning change with medium to light loads, sliding carriage movement. Compared to the version with 1 carriage, this version offers a larger bracketing surface. Suitable for both horizontal and vertical use. State ...

Use: manually-driven accurate processing unit adjustment and positioning with light loads. The compact dimensions and customisable length make this linear table suitable when high stability and reduced dimensions are required. Ideal ...

Use: accurate unit adjustment and positioning with light loads, with manual drive. Material AISI 304 stainless steel sliding shafts on anodised aluminium profile; heads in reinforced polyamide and screws in galvanised steel; carriage ...

mäder manual slide tables simplify manual and automatic insertion and therefore increase the economic efficiency of assembly processes. The advantages: . Insertion is carried out outside the danger area . Parts can be preassembled ...

The mäder pneumatic slide table simplifies manual and automatic insertion and therefore increases the economic efficiency of assembly processes. The advantages: . Insertion is carried out outside the danger area . Parts can be ...

These guided units are delivered without motor, but adapted to your motorization. For Brushless or stepper motors : guides with ballscrew or leadscrew For LinMot® linear motors: linear axes and linear guide units For electric cylinders: ...

Rail length: 6 mm - 68 mm

The NB BALL SPLINE is a linear motion system utilizing the rotational motion of ball elements that can sustain loads and at the same time can transfer torque. It can be used in a wide variety of applications including robotics and transport ...

Rail length: 25 mm - 127 mm

The NB ROTARY BALL SPLINE can be used for both rotational motion and linear motion. The applications include SCARA robots, the vertical shaft of assembly equipment, tool changers, and loaders, etc. The NB ROTARY BALL SPLINE nut consists ...

The NB STROKE BALL SPLINE SPLFS type is a high accuracy linear motion bearing with a limited stroke, to which both radial load and torque can be applied at the same time. It operates with extremely small dynamic friction. The NB STROKE ...

The basic version of the Sliding table HST 150 with a ball locking bolt consists of: a baseplate with mouning bores for all GECHTER presses a ball-bearing guide with carriage a hardened and ground formed anvil a mounting plate ...

Universality, energy-saving and low impact achieved with multi-position positioning unique to motorized devices Compact and rigid. Both straight specifications and space-saving specifications are available New control method combines ...

Inside diameter: 10 mm - 2,000 mm
Outside diameter: 10 mm - 2,000 mm

Engineered with performance-enhancing features for severe-duty applications, Timken® 454-SeriesTM wheel bearings help increase fuel efficiency, improve load-carrying capacity, fit in popular axle and hub designs – and simplify installation ...

Load: 0 N - 8,000 N
Speed: 0 m/s - 8 m/s
Operating temperature: -50 °C - 210 °C

Hepco’s range of extreme temperature and vacuum bearing meets the challenges faced by design engineers by offering a standardised solution for the most challenging of environments. -Suitable for high vacuum use in industrial and ...

Tables type TR1-2 are derived from steel and tables type TR3-6-9 are derived from cast iron castings. They provide a clear example of applications for “GR” systems.They are carefully machined and molded to provide high precision movement. ...

High Load Capacity in a Space-Saving Design Series FGXS is a twin-bore precision table slide that uses a rail bearing system for smooth operation. Users can choose from three mounting styles for optimal flexibility, and dowel holes ...

Type NK frictionless tables are suitable for multiple applications with a large selection of available dimensions. Available in a single-axis design, in five sizes, made of steel or cast iron (depending on size). Type NK frictionless ...

The Cross Roller Table is a compact, high-precision, high-rigidity, limited linear guide unit with built-in cross roller guide. Easily installed with bolts, this product provides a high accuracy linear guiding mechanism. Miniature type ...

The SCHMIDT® Slide tables represent an excellent solution for applications involving press systems with high forces and highly accurate positioning against an adjustable stop. This cost-effective model is ideal for tall parts and for ...

Toksel Makina has been continuing its industrial experience since 1972, specializing in linear motion systems for many years, the Vargel ® product, which is produced by theToksel Makina , is the first in the world. Toksel Makina is experienced ...

Rail length: 10, 12 in
Rail width: 6 in

OAV Air Bearing Linear Slides are high precision and accurate air slide assemblies. Our Bearings provide you with the confidence of integrated bearing motion systems and dynamic response that is much better than conventional rolling bearings. OAV ...

Inside diameter: 20 mm - 55 mm

Wheel hub bearings are used to allow the hub to tum on the axle as well as supporting the weight of the vehicle.They are also referred to as axle bearings.They are used to ensure that the wheels function properly and run smoothly by minimizing ...

Inside diameter: 15 mm - 300 mm
Outside diameter: 42 mm - 540 mm
Width: 13.25 mm - 149 mm

Tapered roller bearing The inner and outer ring raceways are segments of cones and the rollers are tapered so that the conical surfaces of the raceways, and the roller axes, if projected, would all meet at a common point on the main ...

Dust-protected slides RTNG Designed for applications where dirt an dust are present. Thanks to the RTNG being designed with a tight gab between the table and base, dust particles or chips are prevented from entering the linear bearing. Features 1 ...

Automobile hub bearing is the double row angular contact ball bearings, have double row angular contact ball bearings performance characteristics, generally use double separate inner ring structure, with big contact angle, ease of assembly ...

SINGLE axis table for applications with linear units. Can be used in horizontal or vertical position. All elements in stabilized cast iron GG25. All surfaces with grinded finishment. Millimetered rules in XY. Vernier/nonuis matt chrome. ...

ES Standard Ball-Bearing Table ES-1 Standard Ball-Bearing Table ES-OUV Standard Open Ball-Bearing Table ES-OUV-COMPACT Compact Table with Open Ball Bearings EC Coordinated Standard Ball-Bearing Table

Max. Stroke : 340mm Saddle : 200 x 300mm Standard Ball Screw Grade : C7 - Ø20x5 [mm] Precision Ball Screw Grade : C5 or C3 (Optional) Linear Block : Ball Type or Cylindrical Roller Linear Width : 20mm Servo motor stand / coupling ...

Max. Stroke : 650mm Saddle : 300 x 350mm Standard Ball Screw Grade : C7 - Ø25x5 or Ø32x5 [mm] Precision Ball Screw Grade : C5 or C3 (Optional) Linear Block : Ball Type or Cylindrical Roller Linear Width : 25mm Servo motor stand ...