Laboratory automation equipment

The 860 KF Thermoprep is designed for thermal sample preparation in Karl Fischer titration. Numerous substances cannot be analysed by direct Karl Fischer titration as they are not soluble, react with the Karl Fischer reagent or release ...

The 885 Compact Oven Sample Changer is used for thermal sample preparation in Karl Fischer titration. In the oven the samples can be heated up to 250°C. The moisture contained in the sample evaporates and is transported by a dry carrier ...

USB-capable control unit for connecting a maximum of four 800 Dosinos or 805 Dosimats for dosing and Liquid Handling tasks. A Touch Control or the connection to a PC with OMNIS Software, tiamo™, MagIC Net, viva, or 797 VA Computrace is ...

Increase your productivity and pipet whole 96-well plates at once. Just make it faster and more precise. The epMotion 96 overcomes the limits of manual multichannel pipetting. Save time and money while getting better reproducibility ...

With 4 worktable positions it is our most compact solution for accurate and reproducible automated pipetting of the epMotion family. This makes the epMotion 5070 a perfect match for any routine application such as serial dilutions, reagent ...

The 5073l versions are with 6 deck positions, gripper option and automatic exchange of 2 tools very flexible automated liquid handling systems that allow its use as open platforms for diverse liquid handling tasks. They are controlled ...

Vitrified frozen structures are extremely sensitive to environmental influences and need to be protected from the formation of artefacts. Prepare your samples for detailed image evaluation under optimal conditions: • - Cold shield around ...

With Leica EM VCT500 you can transfer samples under cryogenic conditions or at room temperature as well as under vacuum or protected atmosphere. Leica EM VCT500 Stay Connected • - Connect your workflow systems • - Optimize your ...

Ensure the ultrastructures of your tissue samples can be precisely compared every time by preparing them with the EM TP tissue processor. With the EM TP you can be confident that tissue differences between samples observed with your light ...

This device is used for preparing the desired wafer part for analysis with STEM, TEM, etc. by extracting a micro sample with an ion beam in the vacuum chamber of an FIB system. FIB micro-sampling unit and FIB micro-sampling method An ...

The most advanced broad ion beam system for producing exceptionally high-quality cross-section or flat-milling samples for electron microscopy. The ArBlade 5000 is equipped with a fast-milling Ar ion gun with a milling rate twice as ...

The innovative ZONETEM II Desktop Sample Cleaner uses UV-based cleaning technology to minimize or eliminate hydrocarbon contamination for electron microscopy imaging. ZONE offers easy-to-use cleaning for pre-analysis sample preparation, ...

The determination of protein structures from expression to the final structural model is a highly complex, expensive and time consuming process. It is increasingly recognized that automation of each step of this process is the key to ...

泰坦议员™是一个灵活易用的微波年代ample preparation system for pressure digestion of a broad range of samples for subsequent inorganic analysis. The 8-position pressure vessel microwave has dual magnetrons with 1,500 ...

The JANUS® G3 NGS Express™ workstation is a benchtop platform designed to simplify and reduce errors in low-to-moderate throughput NGS library construction. It uses an intuitive interface to guide users through protocol selection and ...

The JANUS® G3 MDT Automated Workstation offers multiple pipetting technologies on a single instrument platform. The instrument consists of an expanding modular platform and a 96- or 384-channel Modular Dispense Technology™ (MDT) dispense ...

5E-APS Automatic Sample Preparation System is designed to produce specified coal samples automatically with unattended operation, which applies to coal sample preparation in power plants, coal mines, chemical industry, metallurgy, construction ...

Reduction and division of the material by online sample preparation system is available. Sample Reduction - Hammer Crusher During the crushing, the sample with high moisture easily adheres to the crushing plate. CKIC provides two ...

Frees you from routine pipetting and provides excellent results The use of electronic pipettes helps to increase throughput in today’s laboratories. However, prolonged manual pipetting takes up precious time, and can lead to repetitive ...

Pipette design and good pipetting practice have always been in the focus to improve ergonomics and reproducibility of pipetting. For the design of the ASSIST, INTEGRA kept these critical factors in mind but went even a step further: ...

Toss the insert and keep the base, saves you money and saves you space! Reagent reservoirs are used by many laboratories for the temporary storage of reagent during pipetting applications. However many reservoirs have flimsy troughs, ...

The MSX432 is designed for sectioning large samples of high-alloy and hardened materials. Short contact times per stroke coupled with intense cooling provide the cold-cutting effects required for microstructural examination (17-inch blade ...

The LECO MSX305 Series sectioning machine are floor models and designed for sectioning large samples of many different types of materials using automated oscillation and servo-pulse sectioning. It is ideal for samples like induction-hardened ...

The LECO MSX255 sectioning machine is ideal for creating medium-sized sections from automotive, ceramic, and composite materials; an automatic pulse feed rate with load control optimizes cutting time; 12-inch blade capacity; 5.4 HP motor Features ...

TECNIMETAL - TEKNIcut LSS is a sturdy light cutter for metallographic sectioning of metals, fibers, plastic, ceramic and mineral samples with various level of toughness. TEKNIcut LSS is suitable for cutting specimen of smaller workpiece ...

Automatic large heavy-duty cutting machine for sectioning large samples for Metallography. Cutting action-Automatic “Y” movement ( Table) with Servo system. Powered by Motor 7.5 HP, 3 phase motor Cut-off wheel dia 14" (350 mm) 3 ...

TEKNIcut PRO X Metallographic Cutting Machine Large heavy duty metallographic cutter for sectioning large samples for metallography. It has similar characteristics to the M model, but with greater capacity with Z, Y and X movements. Cutting ...

Dumbbell Specimen Maker Overview This instrument is suitable for processing all kinds of plates, profiles, pipes or profiles for tensile test, thermal deformation test, impact test and other test splines. According to the user's order, ...

Dumbbell Specimen Maker Overview This instrument is suitable for processing all kinds of plates, profiles, pipes or profiles for tensile test, thermal deformation test, impact test and other test splines. According to the user's order, ...

The SATURN Sequence Timer serves test labs as a high-precision digital control unit, also called "Trigger Generator", "Timer" or simply "Sequencer". It provides flexible and safe control of the test facility and/or unit under test by ...

The ProFeeder Compact for mounting robot is a one-of-a-kind self-contained system that automates production while maintaining a small footprint. It comes with a universal cobot mount that fits 99 percent of known models and a built-in ...

Biobrain® is the new Sartorius automation platform supporting the bioreactors Biostat STR® Generation3 and Biostat® RM for PD to CM facilities. Biobrain® supports native connectivity to BioPAT® MFCS or the ability to connect to 3rd ...

Xsample 610 is a heated single sample changer for the automated filling of highly viscous or even solid samples at room temperature. With its outstanding temperature range of up to 95 °C, the fastest measurement of crude oil, gels, and ...

Quick-Change 96 and 384 Well Pipetting An automated pipetting system is used to pipette multiple well plates. The semi-automated BenchSmart 96 offers the precision of automation paired with the speed and flexibility of manual positioning. ...

Since 1986 we have automated and innovated tools to empower process optimization in laboratories across the globe. Now we enter the next level of lean processing by introducing the CellMek SPS system, designed to automate an end-to-end ...

BE3200 Test Sequencer The BE3200 test sequencer is designed for timing and sequence control of switchgear or ballistics tests. The BE3200 test sequencer is designed for timing and sequence control of switchgear or ballistics tests. ...

Innovative Specimen Preparation Method for TEM / STEM / SEM / EPMA / AUGER The Ion Slicer can prepare thin-film specimens without solvents or chemicals and requires no prior treatment of the specimen other than rectangular slicing ...

The BenchCel Workstation is an automated microplate handler capable of transferring multiple plates at once from a microplate stacker to utilities enabling barcode and other plate labeling, plate centrifugation, and plate sealing. The ...

The new Smart VacPrep is an advanced six-port system that utilizes vacuum to prepare samples by heating and evacuation. Each of the ports may be operated independently. Samples may be added or removed from degas ports without disturbing ...

X travel: 95 mm
Y travel: 220 mm
Z travel: 125 mm

Geological Cutting Machine for sectioning of rock, ceramics, minerals, glass, concrete etc., with Z-axis cutting wheel positioning and table-feed cutting system, manual positioning of the specimen in X and Y axis, X-Y table bed and ...

通过分析样品制备的列OX/TOX labor intensive and time consuming? The XPREP-A series is the fastest column sample preparation system in today’s market. Specially designed to meet international standards like ...

The QPrep, manufactured by HORIBA Scientific, is a syringe pump used in manually dispensing reagent and an autosampler that works with an unconnected syringe pump assembly. The capability of this device is driven by its methodology and ...

The AutoMate-Q40 is a revolutionary system specifically designed and optimized to automate the QuEChERS sample preparation workflow. The AutoMate-Q40 system automates the following sample prep functions Liquid dispensing/pipetting ...