Other electric power supplies and equipment

Input voltage: 90 V - 370 V
Output voltage: 12, 48, 24 V
Current: 3.2, 1.6, 6.3 A

MORNSUN AC-DC converter LI75-20BxxR2S series is a cost-effective power supply with DIN-rail package. The products offer a high level of stability and immunity to noise for industrial control equipment, machinery, and other industrial ...

Input voltage: 85 V - 305 V
Output voltage: 5 V - 48 V
Current: 1.5 A - 50 A

The "305RAC(reliable under all conditions)" ac dc enclosed switched-mode power supply has a power range of 15-320W and a wide input voltage range of 85-305VAC, which can be used normally not only in general environments, but even in harsh ...

Input voltage: 85 V - 430 V
Output voltage: 12, 15, 24, 48, 5 V
Current: 21.4, 13.4, 6.7, 60, 26.7 A

LMF320-23Bxx series are one of Mornsun’s enclosed AC-DC switching power supply. It features universal AC input and at the same time accepts DC input voltage, cost-effective, built-in active PFC function, high efficiency and high reliability. ...

Input voltage: 110 V - 552 V
Output voltage: 24 V
Current: 15, 25 A

Intelligent power supply directly in the field • Field mounting reduces voltage losses due to long cable runs • No control cabinet required thanks to protection class IP67 • Outputs protected by electronic fuses • Output voltage ...

Input voltage: 24 V - 480 V
Output voltage: 29.5 V - 31.6 V
Current: 1.9 A - 8 A

Particularly space-saving design Low heating of the control cabinet High power reserves Low inrush current Safe switch-off by circuit breakers in case of short circuit

Correct mounting possible without an expensive torque wrench Mechanical end stop to protect the O-ring from destruction High shock and vibration resistance Materials for different application requirements

• Determines condition of lead-acid and NiCd cells up to 7000 Ah • On-board Pass/Warning/Fail indications • Robust, repeatable instruments • On-line testing • Checks charger condition by measuring AC ripple ...

• Determines health of lead-acid cells up to 2000 Ah • On-line testing with Pass/Warning/Fail calculations • Measures impedance, interconnection resistance, and cell voltage • Windows CE operating system with 32 ...

• Elliptical clamp shape improves access to earth cables and straps up to 50 mm • Low maintenance flat jaw interface • Measures ground resistance from 0.05 Ω to 1500 Ω • Measures true RMS ground leakage current from 0.5 mA rms to 35 ...

Input voltage: 100 V - 500 V
Output voltage: 24 V
Current: 0 A - 40 A

The SITOP power supply system includes the basic SITOP PSU8600 units, the SITOP CNX8600 expansion units, the SITOP BUF8600 buffer modules, and the SITOP UPS8600 UPS module with BAT8600 battery modules. The modular system toolbox can ...

The SITOP power supply system includes the basic SITOP PSU8600 units, the SITOP CNX8600 expansion units, the SITOP BUF8600 buffer modules, and the SITOP UPS8600 UPS module with BAT8600 battery modules. The modular system toolbox can ...

The SITOP power supply system includes the basic SITOP PSU8600 units, the SITOP CNX8600 expansion units, the SITOP BUF8600 buffer modules, and the SITOP UPS8600 UPS module with BAT8600 battery modules. The modular system toolbox can ...

Input voltage: 100, 240 V
Output voltage: 0 V - 100 V
Current: 0 A - 14.4 A

The XLN series of programmable DC power supplies delivers of clean power on a single output. The compact 1U high 19 inch wide supplies were designed to meet the needs of both system integrators and benchtop users. Fast average command ...

Input voltage: 190 V - 250 V
Output voltage: 0 V - 300 V
Current: 10 A - 30 A

The 9830B Series programmable AC power sources provide high performance and low total harmonic distortion in a 3U form factor. The addition of positive and negative DC offset voltages expands the AC capabilities to operate in DC and AC+DC ...

Input voltage: 200 V - 240 V
Output voltage: 0 V - 1,000 V
Current: 0 A - 120 A

The MR Series high voltage multi-range DC power supplies deliver up to 5 kW of clean output power in a compact 2U form factor. These power supplies are suited for bench use and automated test system applications requiring a wide range ...

With the junction systems you can bundle several sensor signals or distribute actuator signals. 2-way splitters are available in the designs M8 x 1, M12 x 1 and 7/8". Passive 4 / 8-way junction boxes are available in the designs M8 x ...

Input voltage: 10 V - 30 V
Output voltage: 24 V

Power Supply Module — Power-Bridge Collective fault signal via relay Single and redundant power supply via terminals Supply inputs are decoupled Reverse polarity protection Removable screw terminals Connector for power bridge ...

Input voltage: 230 V
Output voltage: 24 V
Current: 3.8 A

Compact power supply module in IP67 24 VDC output voltage - 3.8 A output current Broad temperature range Status LED AC and DC wide-range input Mains buffering up to 50 ms High efficiency No-load and short-circuit proof Natural ...

Voltage: 400 V

Container size: 20 ft(HQ), can be customized; PCS rated power: 250 kW (200 kW and 630 kW as option ) AC rated voltage: 400V Battery capacity: 350 kWh (can be customized according to requirements)

Voltage: 230 V

As a smart model, the neo model is perfectly suited for any smart home thanks to its VS-XMS operating system which can be flexibly expanded. It also convinced our customers and won the test in the “Energy” category in the reader’s choice ...

Voltage: 400 V

The complete solution can be quickly and easily installed in any home, thanks to the practical plug & play technology. Available in three different capacities and with integrated emergency power function, the VARTA element backup is the ...

Voltage: 400 V

The modular design of VARTA flex storage makes it possible to individually adjust the output, capacity and functionality according to different requirements. VARTA flex storage systems are optimised for various applications in the commercial ...

Voltage: 450 V
Energy capacity: 20.48, 15.36, 5.12, 10.24 kWh
Power: 5 kVA

EverGen Solar All-In-One Energy Storage System EverExceed EverGen Series has the best backup energy storage solution to solve all the power problems where grid connection is not stable & reliable. It is a perfect replacement for your ...

Voltage: 204.8, 307.2, 409.6, 512 V
Energy capacity: 10.24, 15.36, 20.48, 25.6 kWh
Power: 10.25, 15.36, 20.48, 25.6 kW

高电压电池EverExceed宙斯PowerPlus +圣ack-mounted LiFePO4 batteries are perfect choice for your home energy storage system and SME (Small Medium Enterprise). The ultramodern stack-mounted design brought to you by our highly ...

Voltage: 120, 220, 230, 240, 110 V
Energy capacity: 5.12, 10.24, 15.36, 20.48 kWh
Power: 8,000, 10,000, 3,000, 6,000 W

EverGen Residential Energy Storage System If you are looking for a backup power solution for your apartment, home, small office, clinic, restaurant etc. applications, where the grid connection is not stable and reliable, then EverExceed ...

The test method is based on pyrolitic decomposition of the material in an inert gas flow (nitrogen). According to ISO 6964 , ASTM D 1603 , maximum temp 1000C, quarts tube, rotameter for N2 gas flow adjustment, sliding sample carrier, ...

Dold manufactures a variety of equipment that has the capacity to spot, and regulate fault currents in order to avoid failures of electrical units, and guarantee an improved operating efficiency and plant safety. These equipment can be ...

Residual current monitor, Type B External differential current transformer ND 5015 The AC/DC sensitive residual current monitor RN 5883 allows an early detection of insulation faults and detects differential currents with AC as well ...

Input voltage: 85 V - 264 V
Output voltage: 5 V
Current: 5 A

Switch Mode Power Supply ■ 5VDC ■ 5A ■ 25W ■ 85-264VAC DIN ■ UL/CE approved ■ DIN rail mounting (TS35/7.5 or 15) ■ HxDxW=93x67x78mm ■ Fixed switching frequency at 100kHz ■ Cooling by free air convection 5 ...

Input voltage: 90 V - 264 V
Output voltage: 24 V
Current: 2.8 A

Switch Mode Power Supply PSU24-060 / PSU24-060-M12 ■ PSU Desktop ■ 24VDC, 2.8A ■ 60W ■ 90-264VAC ■ AC connector with earth ■ (Optional) with M12 connector Features : ■ Universal AC input/Full range ■ No load ...

Input voltage: 85 V - 264 V
Output voltage: 24 V
Current: 3.2 A

High Quality Power Supplies A 120W switchmode power supply that are particularly well suited for supplying the range of JVL integrated servo and steppermotor or other driver/controller with 24 VDC supply voltage. Ultra compact with dimension ...

Input voltage: 90 V - 290 V
Output voltage: 24, 48, 110, 125, 220 V
Current: 4 A - 50 A

DC power systems Compact, flexible and modular DC power supply systems Salicru's DC power-S energy systems feature the following components: DC-S rectifier modules, subracks, a control and monitoring system, a communications module ...

IV-20 .Module with Incremental-Encoderconnection (K0, /K0, K1, /K1, K2, /K2) .Four operating modes for adaptation to the signal source .Six output channels with adjustable output levels (5VDC, 11-30VDC) Electrical Data Operating ...

The battery tester operates in accordance with the well-tried four conductor measuring method and combines the functionality of a testing device and an analyzer. The measuring device supports exact determination of the real (ohmic component) ...

Voltage: 153.6, 204.8, 102.4 V
Energy capacity: 20.48, 10.24, 15.36 kWh

Camel Residential Energy Storage System Product Description With intelligent and all-in-one design concept, residential energy storage is integrated with solar power system, Lithium-ion battery energy storage system and home energy ...

Voltage: 291.2 V - 374.4 V
Energy capacity: 10 kWh

With intelligent and all-in-one design concept, residential energy storage is integrated with solar power system, lithium-ion battery energy storage system and home energy management. Our flexible and efficient residential energy storage ...

Voltage: 51.2 V
Energy capacity: 5 kWh - 40 kWh

With intelligent and all-in-one design concept, residential energy storage is integrated with solar power system, lithium-ion battery energy storage system and home energy management. Our flexible and efficient residential energy storage ...

The electrical tester PCE-CBA 10 is a car battery tester and allows fast and easy testing of 12V voltage starting batteries. The electrical tester has various test modes to determine the condition of the car battery. The LC display of ...

CIRCUTOR RE /标准化的反应堆RBE series, with a special design for their use in static capacitor banks. The best operation of the set requires the reactors to be connected within the triangle composed by the capacitor-reactor ...

CIRCUTOR has a standard range of rejection reactors p = 7 %, with a resonance frequency of 189 Hz for 50 Hz networks (or on demand 227 Hz for 60 Hz networks). This is the most frequent tuning value to avoid any resonance of the 5th harmonic ...

The motor speed regulation equipment, frequency variators, UPS units, etc. generate alterations in the network, which affect other loads in the installation of the operation of the equipment. The LR / LRB reactors connected to the input ...

Mobile battery tester for voltage measurement; measurement for the electrical internal resistance and the electrochemical impedance of a battery block; capacity test via logging of current values and voltage curves; integrated Bluetooth ...

The test instrument is used for the testing of the communication between the charging station and the electric vehicle – with type 2 connector socket (mode 3 charging). The test instrument is connected between the charging station ...

模拟高压绝缘测量与赞誉t with the following voltages: 100, 250, 500 and 1000 V (per EN 61 557 part 1) and 1500, 2000, 2500 and 5000 V. - Large measuring range from 10 k to 1 T Ohm - Easy to read logarithmic ...

For lead-acid batteries until 100 Ah. • Test the starting capacity of the battery. • Indicates the state (good or bad) of the battery. • Test the alternator voltage. It detects if there is aproblem in the load circuit of the vehicle ...

For lead-acid batteries until 160 Ah. 4 FUNCTIONS • Test the starting capacity of the battery. • Indicates the state (good or bad) of the battery. • Test the charge level of the battery • Test the alternator voltage. It detects ...

BT 001 BATTERY TESTER Ref : 056640 EAN CODE : 3154020056640

Input voltage: 85 V - 250 V
Output voltage: 3.3 V - 100 V
Current: 15 A - 40 A

PICO's LPHA1/PHA1 is the perfect match for universal AC inputs to your worldwide DC applications. Used with PICO's LPD, PD and HPD Series of DC-DC Converters you can obtain a variety of DC outputs from 3.3 VDC to 350 VDC in single and ...

Input voltage: 85 V - 250 V
Power: 1,000 W

PICO's HPHA1 is the perfect front end for your universal AC for your single phase or 3 phase input / DC output applications. The standard 2.5" x 4.6" x 0.5" footprint is one of the smallest on the market today in this power range. Providing ...

Input voltage: 90 V - 130 V
Output voltage: 3.3 V - 48 V
Current: 104 mA - 1,000 mA

This series of switching AC to DC power supplies are available in 18 different models. All single and dual outputs are isolated and offer excellent line and and load regulation. These units have continuous short circuit protection, require ...

Input voltage: 100 V - 240 V
Output voltage: 5, 12, 24 V
Current: 0.6, 0.25, 0.13 A

The SP Series from Autonics is a DIN rail mounting type switching power supply model that is specially designed as a power source for universal input. It is capable of driving a variety of controllers. An over-current protection circuit ...

Input voltage: 100 V - 240 V
Output voltage: 12, 24, 5 V
Current: 0.8 A - 20 A

The SPA series is manufactured by Autonics and is a switching power supply that operates with reduced noise and ripple. The unit complies with different kinds of safety standards where it features protection against over currents, short ...

Input voltage: 100 V - 240 V
Output voltage: 5, 12, 24, 48 V
Current: 0.65 A - 20 A

DIN Rail Switching Mode Power Supplies The SPB series switching mode power supplies offer high power conversion efficiency and stable power supply with low noise and ripple and minimal heat generation. The switching mode power supplies ...

Voltage: 58, 288, 468, 648 V

1. Long cycle life and high reliability 2. Small size, light weight, high energy density, green environmental protection 3. Wide operating temperature range, good high and low temperature performance 4. High efficiency, energy saving, ...

Voltage: 220 V

内部电池使用锂离子电池whose cathode material is lithium iron phosphate (LiFePO4), which has high safety, high energy density, and excellent cycle performance; The battery cell is equipped with a high-performance ...

Input voltage: 90 V - 264 V
Output voltage: 4.5 V - 57.6 V
Current: 8 A

The NPS20-M series of open-frame AC-DC power supplies features ITE and medical safety approvals. The series comprises five single output models, offering voltages of 5 V, 12 V, 15 V, 24 V or 48 Vdc. Each model has a typical full load ...

Input voltage: 90 V - 264 V
Output voltage: -15 V - 24 V
Current: 8 A

The NPT40-M series of open-frame AC-DC power supplies comprises three triple output models, covering a variety of standard voltages from 3.3 V to 24 Vdc. Each model accepts a universal input of 90 to 264 Vac or 127 to 300 Vdc. All models ...

Input voltage: 90 V - 264 V
Output voltage: 4 V - 28.8 V
Current: 11 A

The NPS60-M series of open-frame AC-DC power supplies comprises four single output models, offering voltages of 5 V, 12 V, 15 V or 24 Vdc. All four models feature ITE and medical safety approvals and are equipped with dual AC fuses. The ...