Other attachment devices

QUARTER-TURN CLAMPS made of STAINLESS STEEL For quick changeover with no tools & frequent changeover of machinery or fixtures. Reduces your setup time in packaging/printing/food processing machines or assembly/checking fixtures. "Secure ...

KNOB-LOCKING PINS with POSITION SENSOR RECEPTACLES For quick changeover with no tools & frequent changeover of machinery or fixtures. Reduce your setup time in packaging/printing/food processing machines or assembly/checking fixtures. ...

IMAO's Pin-Holding Clamps provide quick changeover with no tools. Ideal for frequent changeover of machinery or fixture. Pin-Holding Clamps reduce your setup time in packaging / printing food processing machines or assembly / checking ...

EXTREME PURITY EXPANDED GRAPHITE FOR INDUSTRIAL VALVES High-purity expanded graphite without a binder. Resistant up to 3,000°C (in an inert atmosphere). Compressed sealing rings made of 99.85% pure expanded graphite, without binder. ...

Expanded Graphite rings LATTYgraf E2 - Carbon graphite tape Composition : Expanded graphite tape Industries : All industries. Material : Pipes flanges, Valves. Fluids : For all fluids Parameters : Speed : m/s pH : -

EXPANDED GRAPHITE TAPE FOR INDUSTRIAL VALVES High-purity expanded graphite without a binder. Temperature resistant up to 3,000°C (in an inert atmosphere). Very low friction coefficient, very high self-lubricating capability, good chemical ...

The Mounting Plate is made of metal and it is utilized with attachment frameworks that is fit for IPN beams. It also guarantees the following elements to be fastened rapidly, safely and in compliance with the prevailing necessities. First ...

Material: High-strength material mix of thermoplastic/aluminium. Version: Black/bright. Note: We offer three different basic brackets for industrial monitors and touch panels: Compact: space-saving, with a swivel range of ...

Material:Special steel.Version:Hardened and ground. Hardness 740 ±80 HV 10Note:From diameter D1 over 15 mm size increases are 0.5 mm.Drawing reference: Form A: hole rounded one end Form B: hole rounded both ends 1) Chamfer for insert

Material:Steel.Version:Electro zinc-plated.Note:The slot nut is twisted into the profile slot and so can be subsequently inserted into existing systems. The spring-loaded ball allows the nut to be fixated anywhere in the profile slot.

MATERIAL Cast AISI CF-8 stainless steel, sandblasted matte finish. FEATURES AND APPLICATIONS These wing knobs allow high tightening torque values and a comfortable grip, thanks to the elongated hub.

STANDARD EXECUTIONS - DIN 508: black-oxide steel class 10 (tensile strength 1200 N/mm2). - DIN 508-NI: AISI 303 stainless steel.

Diameter: 34 mm - 48 mm
Length: 5 µm - 8 µm

PLASTIC WING NUT - GB Black thermoplastic, mat. For certain minimum quantities custom colors, threaded metal inserts available in brass, zinc plated steel or stainless steel upon request.

Diameter: 34 mm - 48 mm
Length: 10 mm - 40 mm

黑色塑料翼螺母- GP热塑性,垫。佛r certain minimum quantities custom colors, threaded metal studs available in brass, zinc plated steel or stainless steel upon request.

Diameter: 8, 10, 6 mm
Length: 36, 28 mm

This plastic wing nut is constructed from thermoplastic material in matt black finish. Varying colors are available on request, subject to specific minimum quantities, as are special inserts. Designed by GAMM, numerous models of the plastic ...

Shaft collars GN 705 essentially comply with the versions of DIN 705. GN 705 also contains a number of practical intermediate sizes in addition to the DIN-versions as well as Type E (grub screw with internal hexagon). The clamping ...

T-nuts DIN 508 with the tensile strength class 8 (plain) are also available without thread. They can be adapted for special applications in this way.

Owing to the anodized coating of the fork head, the bearing is virtually non-wearing.

Aluminum seal- and centring ring for small flange in action Sealing and centring ring, aluminum, Clamping rings Aluminum clamping rings with a wing nut are a rapid connection that can be mounted without any tools for soft (primarily ...

The Series CL220 Split Seam Compression Limiter is produced from high carbon steel and intended for post-mould installation. The spring force generated during installation provides self-retention in the assembly. The flexible diameter ...

Similar to the Series CL220, the CL200 Slim Profile Compression Limiter has a smaller inner diameter (ID) after insertion and a reduced overall profile with less clearance around the bolt. Once installed, the CL200 provides a minimum ...

Series CL350 Split Seam: Similar to the Series CL200 Compression Limiter, the CL350’s were designed with a thicker wall for increased bearing surface when clamped against soft mating materials. Generous bolt clearance also aids in positional ...

Standard element for secure, conductive connections Stop for correct positioning in the profile slot Stainless steel T-nut, e.g. for outdoor or cleanroom applications Profile finishing: not required Insulating cover cap for decoupling ...

Standard element for secure, conductive connections Stop for correct positioning in the profile slot Stainless steel T-nut, e.g. for outdoor or cleanroom applications Profile finishing: not required Insulating cover cap for decoupling ...

Standard element for secure, conductive connections Stop for correct positioning in the profile slot Stainless steel T-nut, e.g. for outdoor or cleanroom applications Profile finishing: not required Insulating cover cap for decoupling ...

Mounting brackets Manufacturer: Gimatic 294TYPES AVAILABLE M4 nut, length 16 mm M5 nut, length 20 mm

Metal T connector Manufacturer: Gimatic 56TYPES AVAILABLE Aluminium adapter, diameter 30 mm to 20 mm, length 48 mm Heavy-duty bracket, shank diameter 14 mm, fastening diameter 36 mm, with screws

Polymer mounting bracket for gripper Manufacturer: Gimatic 14TYPES AVAILABLE Plastic mounting bracket for gripper, tube diameter 20 mm, with screws

- 398 mm short depth 2U rackmount chassis - Supports ATX and mATX form factor motherboard - Dual front USB 3.0 - Support 350W 80 plus single flex ATX power supply or 500W 2U redundant power supply - Front-accessible ...

- All I/O ports, buttons, LEDs, drive bays, AC inlet located on the front side - Supports ATX/Micro ATX MB with CPU TDP up to 120W - Built-in 500W single or redundant power supply - 350mm short depth - Optional module ...

- Supports a PICMG backplane with up to 15 slots or an ATX/Micro-ATX motherboard - Shock-resistant disk drive bay holds four hot-swap 3.5" and 2.5" SAS/SATA disk trays, one slim optical disk drive, and one 2.5" internal drive - ...

Vibrations are easily isolated in different directions Quick Fastening Elements Load range 0.4 kg to 28 kg Decoupling two components effectively from each other: The quick connection element of the product family Flex Locs is a releasable ...

LOKRING SINGLE RING is a custom designed product for each application. Its design takes into account the tube materials that are being joined, the wall thickness and the diameters of the tubes. It is both an approved and certified system ...

High-pressure sealing solution The bonded seal consists of a metallic insert with a vulcanised rubber compound profile which is bonded to the internal diameter. The bonded seal has been developed to obtain both pressure resistance ...

四脚钉对权力放弃适合B-04/BT04 chucks T-Nuts supplied as set of 3 Hardened and ground Kitagawa T-Nuts Key Features Adaptive Chuck: B-04/BT04 Ref. DWG: 1

四脚钉对权力放弃适合B-05/BT05 chucks T-Nuts supplied as set of 3 Hardened and ground Kitagawa T-Nuts Key Features Adaptive Chuck: B-05/BT05 Ref. DWG: 1

四脚钉对权力放弃适合B-06 chucks T-Nuts supplied as set of 3 Hardened and ground Kitagawa T-Nuts Key Features Adaptive Chuck: B-06 Ref. DWG: 1

Automatic-Fastening Sets The fastest and most flexible profile connection No additional profile machining required For a profile connection that is stable and can also be repositioned Outstanding resistance to displacement, torsion ...

Universal-Fastening Sets The high-strength and flexible profile connection For a profile connection that is stable and can also be repositioned Outstanding resistance to displacement, torsion and deflection Minimal assembly requirements ...

Standard-Fastening Sets Stable, fixed screw connection for profiles For a fixed profile connection Outstanding resistance to displacement and torsion Standard-Fastening Set 5, bright zinc-plated Standard-Fastening Set 5, stainless Standard-Fastening ...

LIFTING AND CLAMPING DEVICES OUR RICH STANDARD PARTS ACCESSORIES THE SAFETY FOR YOUR TOOL TRANSPORT LIFTING AND CLAMPING DEVICES Our extensive standard parts accessories include, among others, clamping devices, clamping and lifting ...

系和分离SNAPLOC®没有transmi连接tting vibrations or noise. The two-piece SNAPLOC® fastening system consists of a ball stud and a coupling for quick assembly and is based on the principle of a simple snap connection ...

Tolerance compensation – production efficiency The use of FLEXITOL® systems permits greater manufacturing tolerances, thereby allowing for more effective production methods. FLEXITOL® tolerance compensation systems were developed ...

Our QUICKLOC® clamping, rotation and pressure locks create repeatedly releasable joints. Easy to fit and even easier to operate –the right quick-release system also allows repeated opening and closing. QUICKLOC® is the perfect solution ...

Clevises DIN 71752/DIN ISO 8140 are some of the most frequently used linking elements in industry. These parts can be found everywhere where simple movements are required, e.g. linear pulling, pushing or even axle offset compensation.

Clevis joints with folding spring bolt are connecting elements that are commonly used in industry especially for simple movement sequences, e.g. linear pulling, pushing, sliding or axial offset compensation. They are used in a wide range ...

MBO Clevises are U-shaped or forked metal connectors to which another part can be fastened by means of a bolt or pin passing through the ends of the connector. Clevises are used commonly in the industry for carrying out pulling, pushing, ...

Made from LDPE and PP Colours: white, black Particularly suitable for fixing corrugated panels

Skiffy Series 165 glass panel clamp is made with ABS. It is available in three colors - white, black and grey. It includes a F1 cylinder and F2 screwed head, and is ideal for a range of boards. It is recommended to check screw series ...

Made from nylon-6 (PA-6) Colour: grey Resistant to -30 up to +120°C

These two styles of quick access fasteners provide convenient installation and operation with grip tolerance and a wide range of tolerance for support panel and mounting panel thicknesses. They are available in metallic and thermoplastic ...

This versatile design offers a comprehensive range of low-cost, grip-tolerant solutions for high volume production applications. It provides a detent and positive stop for consistent positioning and vibration-resistant performance. Quick-access/quick-release ...

These versatile, economical quarter turn fasteners for high-volume light-duty applications provide a low installed cost, attractive aesthetics, and more generous tolerance ranges than other quarter turn fasteners. Built-in detents indicate ...

3U CompactPCI Enclosure with 6-slot Backplane and Redundant Power Modules Key Features 3U CompactPCI backplane with one system slot and five peripheral slots Suitable for rackmount applications 3U 48HP fanless enclosure ...

3U Enclosure with 32-bit Backplane and Wide Temperature Range CompactPCI® Redundant Power Supply Key Features 3U CompactPCI® single system, seven peripheral slot configuration Equipped with wide temperature range CompactPCI® redundant ...

3U Enclosure with 32-bit Backplane, CompactPCI Redundant Power Supply Key Features Dual 3U CompactPCI® systems, each with five peripheral slots and one system slot 1/1 250 W CompactPCI® Power supplies Suitable for ...

Diameter: 8 mm