Clutches

Torque: 10 Nm - 640 Nm
Rotational speed: 2,200 rpm - 8,600 rpm

is an electromagnetic pole faceclutchactuated by industrial current. By applying a DC voltage to the magnetic coil, a magnetic field is formed. This pulls the armature plate against the rotor with friction lining. The ...

Torque: 8,000 Nm - 315,000 Nm
Rotational speed: 750 rpm - 2,200 rpm

... Benefits The advantage of the MESLU/RATO or MESLU/VULKARDAN Eclutchcombination compared to a flexibleclutchwith integrated elastic elements lies in the fact that theclutch...

Torque: 11,500 Nm - 14,500 Nm

... coupling with a Desch Planoxclutch. The VULASTIK L coupling is available in different stiffness ratings so the drive system can be perfectly tuned in terms of torsional vibration. The Planoxclutchis ...

Torque: 4 Nm - 1,850 Nm

... centrifugal force acting on the flyweights overcomes the spring force. When the speed is high enough, the linings contact theclutchdrum, and friction between the linings and the drum allows torque to be transmitted between the two.

Torque: 4.3 Nm - 310 Nm

... flyweights lift from their seats and the linings on the flyweights contact the inside diameter of theclutchdrum. Friction between the linings and theclutchdrum allows torque to be transmitted.

Torque: 1.7 Nm - 145 Nm

... force. Then the flyweights lift from their seats and the linings contact the inside diameter of theclutchdrum. Friction between the linings and theclutchdrum allows torque to be transmitted.

... flexible coupling or via a 'BD' seriesclutch. Type BD clutches have been designed to mount onto any engine with flywheel and bellhousing conforming to SAE dimensions. These clutches consist of an overcentreclutch...

Torque: 0.25 Nm - 12,000 Nm
Rotational speed: 200 rpm - 4,000 rpm

... . » Operator convenience/safety. » Cold weather starting. These are flange mounted, normally a two piece constructionclutchtypically mounted directly on to the pumps. Solid forged rotor: A one piece solid ...

Torque: 271 Nm - 2,033 Nm

MMCClutch海洋&系列液压泵应用~MMC series electromagnetic clutches are designed for use with hydraulic pumps, many of which are used in marine winch drives. Typically flange or plate mounted, ...

Torque: 0.2 Nm - 5 Nm
Rotational speed: 40 rpm - 3,000 rpm

Electromagnetic particle brushless clutches The fixed coil special design is offering a very easy mechanical integration. Electromagnetic particle brushless clutches These devices are particularly recommended when independent ...

Torque: 18.5 ft.lb - 2,899 ft.lb
Power: 15 W - 100 W
Rotational speed: 1,400 rpm - 5,000 rpm

Clutchis designed for high torque small space environments where no slip is desired.Clutchcan be used dry or in an oil bath. A zero backlash option is available. Zero drag torque whenclutch...

Torque: 12 ft.lb - 6195 ft.lb
Power: 12 W - 175 W
Rotational speed: 200 rpm - 1,400 rpm

... designed to produce very high torque in an overall compact design. Torque is produced via multiple disks condensing overallclutchsize. QUICK RELEASE TIME Separator springs between the friction plates allow for quick ...

Torque: 58 ft.lb - 1,500 ft.lb
Power: 40 W - 170 W
Rotational speed: 1,800 rpm - 3,600 rpm

... but now are also used as clutches for hydraulic pumps (clutchpump), high pressure piston pumps, vacuum pumps and centrifugal pumps. The units that are used toclutchhydraulic pumps and toclutch...

Torque: 0.0565, 0.23, 0.113, 1.8, 0.85 Nm
Power: 15 W - 450 W
Rotational speed: 0 rpm - 3,600 rpm

Product Description Like the Hysteresis Brake, the Magtrol HysteresisClutchdevelops torque strictly through a magnetic air-gap, ensuring an absolutely smooth transmission of torque from the drive unit to the driven ...

Torque: 40 Nm - 10,000 Nm

... is stable. The Cross SheargardClutchcan work with Standard TorqueLimiterPlatewheels and Roller Chain Couplings. The device is available with a wide range of preset torque ratings and optional sensor ...

Torque: 1.7 Nm - 785 Nm
Rotational speed: 480 rpm - 1,400 rpm

The CGX Crossgard series is manufactured by Cross Morse, and is aclutchthat is ideal for use in equipment that requires high performance, and accuracy. The unit also offers an overload protection to the equipment, and ...

Torque: 0.5 Nm - 500 Nm

COMBINORM C operating current-actuated clutches use the force flow concentrated on two pole faces of an electromagnet for non-positive connection of shafts and loads connected to these. Properties ■ Voltages from 24 V, different ...

Torque: 21 Nm - 390 Nm

As a positive structure with interlocked rotors and anchor parts, maximum torque is transmitted within a small assembly space. Properties ■ Voltages from 24 V, different voltage (optional) ■ Compact, maintenance-free design ■ Backlash ...

Torque: 6 Nm - 130 Nm

COMBIBOXclutch/brake combinations are designed for joining, separating and holding rotating shafts. The units are constructed in compact aluminium housing and provide an autonomous bearing that can be used between ...

Torque: 0.2 Nm - 260 Nm
Rotational speed: 2,500 rpm - 16,000 rpm

... ActiveClutchLine are designed for the frictionally engaged transmission of torque in dry running. The force effect of an electromagnetic field when applying a DC voltage is used for torque transmission (electromagnetic ...

Torque: 2.7 Nm - 12,520 Nm
Rotational speed: 20 rpm - 850 rpm

... one revolution or multiple revolutions. Thisclutchtypically provides five times the duty life of wrap spring clutches for indexing, shearing, bending, fastening, loading or similar applications. Eachclutch...

Torque: 30 Nm - 569 Nm
Rotational speed: 50 rpm - 500 rpm

... self-contained packages that include a solenoid-operated, single revolutionclutchwith available anti-rollback and anti-overrun features. Other features include: rugged roller-rampclutchdesign, dimensionally ...

The Hilliard Corporation’s linkless centrifugal clutches combine a dowel pin, vibration dampening bushing and a symmetrical spring design. The results are a long service life at an economical price. Other benefits include soft starts, ...

Torque: 400 Nm - 12,000 Nm

SGFUSION-SC SWITCHABLECLUTCHThe SGF switchableclutchis for the connection and disconnection of main and auxiliary drives. The clutches are used in e.g. hybrid applications, test benches and special machines.

Torque: 17.5 - 550 Nm
Rotational speed: 1,000 rpm - 2,500 rpm

The NE type pneumaticclutchby EIDE is a compact unit with a pneumaticclutchwhich disengages via a spring reaction. The actuator is powered radially with compressed air at a nominal pressure of 5.5 ...

Torque: 18 Nm - 2,400 Nm
Rotational speed: 1,000 rpm - 2,500 rpm

The pneumatic toothclutchNE/CD is a compact unit with a pneumaticclutchthat disengages via a spring reaction. The actuator is powered radially with compressed air at a nominal pressure of 5.5 bar. ...

Torque: 530 Nm - 1,750 Nm
Rotational speed: 2,000 rpm - 3,000 rpm

The ENP pneumatic pulleyclutchis a compact unit for airclutchand spring reaction release. The ENPclutch特点是有一个滑轮集成theclutch, ...

Torque: 0.3 - 200 Nm
Power: 6, 8, 10 W

... created where there is a requirement for speed and speed to be able to optmize the effectiveness of several machine works. Theclutchand brakes are especially field tested with a very dependable and power efficient capability.

Torque: 15.83 ft.lb - 1,767 ft.lb

... linear in response to air pressure applied. Mounting Standard Series Through Shaft Mount Through/Mid Shaft or End Shaft.Clutchslides on shaft and is fixed with set screws and a customer supplied key. Anti-rotation ...

Torque: 42.16 ft.lb - 2,031.25 ft.lb

... Industrial frictionclutchis engaged with spring pressure. A fixed amount of torque is transmitted. To releaseclutch, air pressure is applied to overcome the spring pressure. Mounting End of ...

Torque: 42.41 ft.lb - 1,977.75 ft.lb

... Mounted Component or Pilot Mounted Component to Shaft Operation Frictionclutchis applied with spring pressure. A fixed amount of torque is transmitted. To releaseclutch, air pressure is applied ...

Torque: 40 Nm - 10,000 Nm
Rotational speed: 700 rpm - 3,200 rpm

... frequency of engagement/hour and in all those cases where the moment of inertia of the brake-clutchunit Braking action is obtained by means of springs, theclutchoperates pneumatically.Materials ...

The interactive free-typeclutchis a mechanical element that allows for the motive power provided to the input shaft to be transmitted to the output shaft; while the motive power provided to the output shaft (reverse ...

Electromagnetic clutches and solenoids are generally used as methods for transmitting and shutting off motive power, and require electrical and other kinds of wiring. Selectable clutches can be operated using a switch lever to "lock", ...

Rotational speed: 50 rpm - 250 rpm

... shutoff of motive power. The interactiveclutchis a mechanical element that makes it possible to transmit motive power at a uniform velocity (1:1). The vertical hold type includes an internal torquelimiter...

Torque: 1.25 Nm

BI-DIRECTIONAL NO-BACKCLUTCHSR2 provides controlled motion to adjust height at any position. Through its inverse interrupting mechanism, this breakthrough technique conducts driving from the input shaft to the output ...

Torque: 12.5 Nm

BI-DIRECTIONAL NO-BACKCLUTCHSR12 series is a high torqueclutchthat can move your equipment and products smoothly and stop heavy objects at any position. It can handle high torque, but can be installed ...

Torque: 45 Nm - 8,000 Nm

CLUTCHEMSL/DF-GE 08.26.•••.51 4 POLE FACE electromagneticclutchEMSL/DF-GE Monobloc version with elastic coupling Tension 24 V dc – 0 + 15% Used ONLY for dry applications. Motion is transmitted ...

Torque: 10 Nm - 3,200 Nm
Rotational speed: 25 rpm - 500 rpm

Multidisc electromagneticclutchwith static magnet. Used for dry applications at low speed. Motion is transmitted between the shaft splined to the hub (2) and the housing (4), which can be fitted with flanges, pulleys, ...

Torque: 6 Nm - 150 Nm
Rotational speed: 3,800 rpm - 8,000 rpm

Single-disc electromagneticclutchwith laminated armature. Used for dry applications. Motion is transmitted between a shaft splined to the rotor (1), and the laminated armature (7) that can be connected to a pulley or ...

Torque: 0.6 Nm - 28.2 Nm

... Adjustable Indexing & Positive Stop Indexing. This wide range makes it suitable for various applications. Its basic springclutchconsists of three parts which are an input hub, an output hub, and a spring. SP-Series ...

Torque: 2.8 Nm - 5.6 Nm
Rotational speed: 1,200 rpm - 3,000 rpm

... utilizes the greater torque ability of a vaultclutchalong with ease and regulation of a traditional mechanicalclutch. The basic wrap vaultclutchas well as the electromagnetic coil ...

Torque: 1.7 Nm - 39.5 Nm

... the greater torque ability of a vaultclutchand a two-directional free-flowing output. The clutches can be well-suited of various applications like loop and spool winding or applications needing a free flowingclutch. ...

Torque: 1.7 Nm
Rotational speed: 100 rpm - 800 rpm

The Model EC15 transfers up to 1.7 N-m (15 lb-in) of total load with consistently repeatable performance for one million actuations. Reell's clutches are designed for easy mechanical and electrical assembly and for low power consumption. ...

Torque: 2.83 Nm
Rotational speed: 100 rpm - 800 rpm

The model EC25 high performanceclutchhas proven ideal for applications requiring consistent, repeatable performance for 1 million actuations at 2.83 N-m (25 lb-in) of total load. Slip during engagement is virtually ...

Torque: 2.83 Nm
Rotational speed: 100 rpm - 800 rpm

The model EC25 Long-Life (EC25LL) design is optimized for applications which have higher hour and/or input revolution requirements up to 80 million bearing revolutions. Slip during engagement is virtually eliminated and disengagement ...

Industrial Friction Materialsclutchrelining services will reline any kind, size or type ofclutchfrom a small centrifugal sewing machineclutchto a large 14” tractor discclutch...

... are a long-established supplier of high qualityclutchlinings in various materials with a full range of sizes for all types of applications. Our range covers varying coefficients of friction andclutch...

Clutches by energizing The power-onclutchcreates a magnetic field that attracts the moving armature thus coupling the two shafts. Thus, the uncoupling is done by lack of current.

Torque: 220 Nm - 4,500 Nm

... assumes the function of maneuvering the ship, enabling the vessel and its crew to reach the next secure harbor. The KAZclutchworks in an opened state as a combined supporting and axial bearing. The propeller thrust ...

Cast iron pressure plate, small weight, heat capacity big, good heat dissipation; Castclutchcover, strong, and not easy to change. Imported diaphragm spring, support more pressing force in same size, and stable ...

Cast iron pressure plate, small weight, heat capacity big, good heat dissipation; Castclutchcover, strong, and not easy to change. Imported diaphragm spring, support more pressing force in same size, and stable ...

Cast iron pressure plate, small weight, heat capacity big, good heat dissipation; Castclutchcover, strong, and not easy to change. Imported diaphragm spring, support more pressing force in same size, and stable ...