DIN rail converters

Limit frequency 40 kHz, Voltage or current ouptput, Incrementing output (Spacing factor 1 ... 9999), Multi-range power pack, 2-, 3-, 4-wire and NAMUR sensors as well as rotary encoder connectable, Rated voltage: 200 ... 230 V AC ; 100 ...

DINrailMountElectropneumatic Actuator -Input 0…20mA/4…20mA -Input resistance: 200 Ω -Output: 0,2…1 bar, 3…15 psi -Air flow rate: 2,5 m3/h -Feature: linear, ...

The signalconverterSMI473 converts digital signals (operating and alarm messages) to serial output signals for the BMS bus. Its 12 digital inputs for potential-free contacts can be split into two groups as alarm or ...

S1XMmM Universal Current / VoltageConverter, universal sensor input, Analog Output and RS485 Modbus RTU, RMS, AC and DC measurement, Min / Max and Average measurement, Frequency and Crest factor measurement, temperature ...

…supports the connection of 5TCPclients simultaneously. And the product adopts aluminum alloy shell with firm design and supportsDIN-railinstallation. All serial signal provide built-in photoelectric isolation.

…-RTU/ASCII to PROFINET protocolconverter. This product can connect Modbus device to PLC(S7-300/1200/1500/400) with PROFINET communication interface. It adopts aluminum alloy shell with firm design and supportsDIN-rail…

…supports the connection of 5TCPclients simultaneously. And the product adopts aluminum alloy shell with firm design and supportsDIN-railinstallation. All serial signal provide built-in photoelectric isolation.

The OMX 200 model series are digitalDINrailmountedsignalconvertershoused in an enclosure only 12.5 mm wide. The OMX 211PM type is a simple single-channel isolator ...

The OMX 200 model series are digitalDINrailmountedsignalconvertershoused in an enclosure only 12.5 mm wide. The OMX 212PM type is a simple single-channel isolator/splitter ...

The OMX 300 model series are digitalDINrailmountedsignalconvertershoused in an enclosure only 17.5 mm wide. The OMX 311UNI type is a galvanic isolated single-channel ...

…points on RS422/RS485 side) -24V power supply -Line surge protection and line ESD protection This industrialconverter, designed for rack installation, supports automatic shifting function of RS485.

…mode -15 KV ESD protection and HF filtering on the copper side -Robust & compact metal case, CE standards, 35 mmDinRailmounting Introduction Using fiber optic enables to use a higher ...

…model) -15 KV ESD protection and HF filtering on the copper side -Robust & compact metal case, CE standards, 35 mmDinRailmounting Introduction Using fiber optic enables to use a higher ...

In Northern and Central European installations there are many devices that log consumption, equipped with M-BUS communications protocols or interfaces. These equipments measure cold and hot water consumption, as well steam, gas, electricity, ...

TCP1RS+ is a gateway designed to convert the Ethernet physical environment to RS-485. The unit can be fully customised with the software provided, allowing to configure any parameter related to the Ethernet or serial communications ports.

The SU-302 serial to USBconverterembeds almost every serial devices via USB into the most diverse industrial environments. The SU-302 is mounted on a top-hatrailin a control cabinet. Then the serial ...

The IV210 is the functionally compatible and more powerful successor to our proven signalconverterIV251. With its SSI interface, the IV210 converts absolute position values into fractions of a millisecond into ...

The FU210 is the functionally compatible and more powerful successor to our proven signalconverterFU252. TheconverterFU210 processes input signals as frequency or velocity information. It is able ...

The ZU210 is the functionally compatible and more powerful successor to our proven signalconverterZU252. The ZU210 converts counting pulses or position values up to 1 MHz almost instantaneously into analog or serial ...

The 8 input, analogue to digitalconverterwas designed to implement all analogue outputs into the digital world of RMS. The 8 inputs offer the flexibilty of using a current system with one of the newest and most flexible ...

The 8 input, analogue to digitalconverterwas designed to implement all analogue outputs into the digital world of RMS. The 8 inputs offer the flexibilty of using a current system with one of the newest and most flexible ...

…ModBUS RTU slave protocol CONNECTION:microUSB on front panel PROGRAMMING:Via software EASY Setup or via DIP-switch MOUNTING:DINrail46277, 35 mm DIMENSION WXHXD:17,5x100x112 mm SHIPPING AND EXPORT ...

Z107 RS232 - RS485/422 serialconverterforDINrailinstallation Z107 allows a transparent conversion and isolation of RS485/RS422 serial line into RS232 and viceversa.The ...

Z109TC2-1 Thermocouple to DC isolator /converterZ109TC2-1 is aconverterfor Thermocouples TCs (J,K, E, N, S, R, B, T) and provides a mA/V standard output signal. It’s completely configurable through ...

The MultiCOM 411 connects a Riello UPS to a Profibus DP Network. In industrial environments, the Gateway integrates UPS management and monitoring into a control system. The Gateway uses the field bus design – one of the most popular used ...

…operating temperature range Overview of 3onedata IMC100 Series Unmanaged Industrial MediaConverterIMC100 series are unmanaged industrial mediaconverters. This series have 14 products and support ...

…unmanaged industrial PoE fiberconverters, and the PoE power supply is up to the protocol standard of IEEE 802.3af/at. This series have two products and provide 100M copper ports, fiber ports and PoE copper ports. They ...

…, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart city,railtransit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.

…G Ex ia IIC T4 Ga II 1 D Ex ia IIIC T135°C Da Function Tia1 temperatureconvertersaimed at converting signals from RTD100 sensor to a standard 4 to 20mA current signal.Dinrailmounting ...

…热电偶。•线性电阻的转换variation (from level sensors or valves).• Voltage (mV) and ohmic measurement.DINrailmountingCertified to be installed in explosive atmosphere (see codification). Input ...

…热电偶。•线性电阻的转换variation (from level sensors or valves).• Voltage (mV) and ohmic measurement.DINrailmountingCertified to be installed in explosive atmosphere (see codification). Electrical ...

The ERIS-100 device is a fibre-optic Ethernetconverterwith a switch function that enables Ethernet networks to be connected in a point-to-point topology using two devices of the same type or two independent packet networks ...

The SE-39converteris an unmanaged fiber-optic Ethernetconverterwith a switch function, which enables connection of Ethernet networks in a point-to-point topology using two devices with electrical ...

Converterfor optical and electrical interfaces to be installed in two sockets dedicated to SFP modules. A wide range of interfaces (optical, electrical) provided by the manufacturer, as well as SFP transceivers owned ...

Temperatureconverterto connect up to four different resistance temperature sensors in dual cable technology with a resolution in 0.1 K. The addressing of the four temperature sensors is done via four M-Bus addresses ...

…Modbus TCP SlaveConverterwith one Ethernet interface and one CAN interface. It allows user to connect some ModTCP Master with an existing CAN network. It has integrated isolation protection module and easier to install ...

…temperature - -40°C~85°C Humidity - 15 to 95% non-condensing Installation -DINrailPower supply Voltage - 9~30V DC Current - 20mA, 24V DC Functions The GCAN-204converter…

…70 x 25 mm Weight - approx.100g Operating temperature - -40°C~85°C Humidity - 15 to 95% non-condensing Installation -DINrailEMC test - EN 55024:2011-09 EN 55022:2011-12 Protection grade - ...

…频率range, it can be set up by the software installed on the computer - Lightweight appearance, isolationconverter: 17.5mm width;DINrail: 35mm width

AT-TC2 TemperatureConverterAT2-TC Temperature(TC)Converteradopts MCU digital design. The thermocouple input type and temperature range of theconvertercan be changed through ...

…Supports Modbus/TCP for easy integration with HMI/SCADA or OPC server. ● 8 single ended input channels with 16bits A/Dconverterwith optical isolation. ● Four models for Voltage: ±150mV、±500mV、0~5V、±10V/，or Current: ...

The DS101 industrial mediaconverterprovides industrial-grade media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST connectors). The ruggedized IP41 design keeps automation applications running continuously ...

…Not all power supplies haveDINRailmounting available. Optional (Must be chosen at time of order):DINRailMounting for the 10881A module. Look on the ...

…Not all power supplies haveDINRailmounting available. Optional (Must be chosen at time of order):DINRailMounting for the 10888A module. Look on the ...

…Not all power supplies haveDINRailmounting available. Optional (Must be chosen at time of order):DINRailMounting for the 10889A module. Look on the ...

我们提供了一个广泛的网络ing products. Ethernetconverteris designed for access control, remote control and monitoring; Ethernet wireless provides wireless connectivity for serial devices and Ethernet devices.

我们提供了一个广泛的网络ing products. Ethernetconverteris designed for access control, remote control and monitoring; Ethernet wireless provides wireless connectivity for serial devices and Ethernet devices.

…tried-and-tested quality Levelconvertersare used to supply connected devices with electricity in an M-Bus system. The electricity requirement is counted in “standard loads”. MBS has decoupled the M-Bus/USB level ...

-DINrailunit: 23 x 100 x 120 mm -Pt100, thermocouple -mV, V, mA, ohm -sensor power supply, potentiometer, stress gauge -frequency: TTL, Namur, NPN, PNP,....... -square root extraction -customised ...