气缸MI系列

双作用 微型 标准

1,按照ISO6432标准(φ8 ~φ25)2、前后盖拥有固定缓冲垫也可以减少气缸的方位变化的影响;3、封底有几种模式,这使得气缸的安装更方便;4、前后盖,不锈钢块采用铆接滚积结构形成可靠连接;5、活塞杆和缸体的材料不锈钢和腐蚀性使缸一般适应工作环境;6、有气缸及配件与几个规格为您选择安装。安装与使用1。当负载变化时,汽缸与丰富的输出能力应当埃德。2。相对汽缸与耐高温、耐腐蚀的选择条件下的高温或腐蚀。3所示。应采取必要的保护措施在湿度较高的环境中,灰尘和水滴,石油灰尘和焊渣。 4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder. 5.The medium used by cylinder shall be filtered to 40μm or below. 6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing. 7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.