硬铬电镀整流器技术规格•三相230V/400V AC +/- 10%50/60Hz电源(根据要求任何其他电压)。• 最大限度。输出电压:15V DC。• 最大限度。输出电流:1A DC - 100.000A DC。•SCR技术。•带有相反应器的六相整流器单元。•以恒定电压或电流操作。•调节额定值的1%至100%。•可调节的输出电流/电压向上坡道。 • Max. output current limitation. • Mains power detection with rectifier stop and warning. • Master door-lock switch with automatic release coil. • Max. room temperature: 40 °C. • Max. humidity: 80 %. • Isolation from mains 3500 Vrms. • Noise level below 75 db. • Protection against overtemperature of regulation unit, rectifier unit and power transformer windings. • Rectifier protected by ultra fast acting fuses. • IP 20 forced air cooling. • IP 55 oil cooling. ACCESSORIES 1. Electronic polarity inversion. 2. Works based on pulsed current. 3. Operator panel with 99 possible programs and full management of work process stages. 4. Ripple filter impedance. 5. 0-10V DC and/or 4 – 20 mA analogue inputs/outputs for control via PLC. 6. Supervision panel with Pentium 4 processor and 12″ TFT screen (monitors up to 45 rectifiers). 7. Instrument for checking the three supply phases ( kW, KVA, KVAR, A, P.F., VL-L, VN-L, kW/h ). 8. Communication and control system via RCV RS 485 serial line. 9. CANopen-based communication and control system. 10. PROFIBUS-based communication and control system.